Air cooler (also known as the cooling fan) is a kind of suitable for all kinds of cold storage, DL type air cooler cooling equipment Applicable to library temperature above 0 ℃ cold storage, cold storage such as preserved eggs or vegetables.
1 case, phosphating and secondary pensu processing, convenient and clean, highly anticorrosive, beautiful shape, can be selected according to user requirements iron plate, galvanized sheet, embossed aluminum sheet and material such as stainless steel plate.
2, 12, 16, Ø Ø coil can be selected according to the requirements of customers. Set piece, through mechanical or hydraulic up tube aluminum fin tightly wrapped in copper tube, reduce the contact thermal resistance, improve the efficiency of heat transfer.
3, after testing the products, then after cleaning tube, to thoroughly remove oil pipe, water and scale, etc.
4, electric heating tube spacing and power is calculated, thus ensuring efficient cream.
5, using special motor, in order to keep the air cooler under the low temperature wet state can run properly. In addition, can choose according to the needs of the user adaptation of explosion-proof motor.
6, stainless steel tank type hanger, convenient installation.
7 all through pressure maintaining nitrogen inflator, before shipment.
| Model | Refrigerating capacity R22 Capacity DT=7K | The evaporation area Surface | The pipe volume | Fan parameters 3-380VFans Data | Electrical defrosting | The weight of the N.W | ||||||
| Diameter | SinglePower | Airflow | Airthrow | Noise | Coil | Tray | Total | |||||
| kW | m2 | dm3 | mm | W | m3/h | m | dB(A) | kW | kW | kW | kg | |
| DL-2.1/10 | 2.1 | 10 | 0.88 | 1×300 | 75 | 1220 | 9 | 58 | 0.6 | 0.6 | 1.2 | 20 |
| DL-3.1/15 | 3.1 | 15 | 1.53 | 2×300 | 75 | 2440 | 9 | 58 | 0.9 | 0.9 | 1.8 | 28 |
| DL-4.2/20 | 4.2 | 20 | 1.77 | 2×300 | 75 | 2440 | 9 | 58 | 1 | 1 | 2 | 35 |
| DL-5.2/25 | 5.2 | 25 | 2.26 | 3×300 | 75 | 3660 | 9 | 58 | 1.2 | 1.2 | 2.4 | 42 |
| DL-8.2/40 | 8.2 | 40 | 3.23 | 2×400 | 180 | 6800 | 12 | 68 | 1.4 | 0.7 | 2.1 | 65 |
| DL-11.5/55 | 11.5 | 55 | 4.31 | 2×400 | 180 | 6800 | 12 | 68 | 1.8 | 0.9 | 2.7 | 72 |
| DL-16.7/80 | 16.7 | 80 | 6.39 | 2×450 | 250 | 9600 | 15 | 68 | 2.4 | 1.2 | 3.6 | 97 |
| DL-22.0/105 | 22 | 105 | 7.99 | 2×450 | 250 | 9600 | 15 | 68 | 3.2 | 1.6 | 4.8 | 106 |
| DL-25.8/125 | 25.8 | 125 | 10.53 | 3×450 | 250 | 14400 | 15 | 68 | 3.8 | 1.9 | 5.7 | 140 |
| DL-33.6/160 | 33.6 | 160 | 12.72 | 3×450 | 250 | 14400 | 15 | 68 | 4.6 | 2.3 | 6.9 | 160 |
| DL-38.7/185 | 38.7 | 185 | 14.86 | 4×450 | 250 | 19200 | 15 | 68 | 5.4 | 2.7 | 8.1 | 195 |
| DL-44.0/210 | 44 | 210 | 16.79 | 4×450 | 250 | 19200 | 15 | 68 | 6 | 3 | 9 | 208 |
| DL-52.9/260 | 52.9 | 260 | 45.73 | 2×600 | 1500 | 20000 | 17 | 72 | 9 | 1.8 | 10.8 | 296 |
| DL-67.2/330 | 67.2 | 330 | 57.34 | 3×600 | 1500 | 30000 | 22 | 73 | 11 | 2.2 | 13.2 | 376 |
| DL-83.4/410 | 83.4 | 410 | 68.48 | 3×600 | 1500 | 30000 | 22 | 73 | 13 | 2.6 | 15.6 | 435 |
| DL-95.5/475 | 95.5 | 475 | 81 | 3×700 | 2200 | 48000 | 22 | 72 | 16.5 | 2.5 | 19 | 585 |
| DL-117.0/580 | 117 | 580 | 100 | 3×700 | 2200 | 48000 | 22 | 75 | 20 | 3 | 23 | 625 |
| DL-140.0/695 | 140 | 695 | 117 | 4×700 | 2200 | 64000 | 22 | 75 | 24.5 | 3 | 27.5 | 750 |
| DL-161.0/795 | 161 | 795 | 135 | 4×700 | 2200 | 64000 | 22 | 75 | 28 | 3 | 31 | 770 |
